End Connected — Gages Only — Valves Not Shown
Column Type (Remote Mount)

					Fig. 3-1		End ports are typical 1/2" or 3/4" F-NPT. Optional ANSI flanges or GraylockTM hubs may be attached at factory. INFERNO Rust-proof finish includes zinc-plated bolting. See Pressure Ratings
Gage Size		Visible Length			Overall Length
# Sections	Nominal Glass Size	Inches	(mm)		Inches	(mm)
1	1	3.75	95		5.25	133
1	2	4.75	121		6.25	159
1	3	5.75	146		7.25	184
1	4	6.75	171		8.25	210
1	5	7.875	200		9.375	238
1	6	9.125	232		10.625	270
1	7	10.25	260		11.75	298
1	8	11.875	302		13.375	340
1	9	12.625	321		14.125	359
2	4	15	381		16.5	419
2	5	17.25	438		18.75	476
2	6	19.75	502		21.25	540
2	7	22	559		23.5	597	Example: RA-27 (2 section, #7 glass) 22" (559mm) Vis. Glass 23.5" (597mm) O.A.L.
2	8	25.25	641		26.75	679
2	9	26.75	679		28.25	718
3	6	30.375	772		31.875	810
3	7	33.75	857		35.25	895
3	8	38.625	981		40.125	1019
3	9	40.875	1038		42.375	1076
4	7	45.5	1156		47	1194
4	8	52	1321		53.5	1359
4	9	55	1397		56.5	1435
5	7	57.25	1454		58.75	1492
5	8	65.375	1661		66.875	1699
5	9	69.125	1756		70.625	1794
6	8	78.75	2000		80.25	2038
6	9	83.25	2115		84.75	2153
7	8	92.125	2340		93.625	2378
7	9	97.375	2473		98.875	2511
8	8	105.5	2680		107	2718
8	9	111.5	2832		113	2870
9	8	118.875	3019		120.375	3058
9	9	125.625	3191		127.125	3229
10	8	132.25	3359		133.75	3397
10	9	139.75	3550		141.25	3588